Blog and PDP Views Code


St. Marks technical specifications

Structure: Multi-ply Engineered Wood Flooring w/Eucalyptus Core
Wear Layer: 1.2mm Rotary American Hickory
Width: 5” Nominal (127mm)
Overall Thickness: 3/8” Nominal (9mm)
Lengths: Random Fixed Lengths, 48 Inches Maximum
Surface Treatment: Handscraped w/ Handworked Edges & Ends
Coating System: Treffert UV Cured Coating w/Aluminum Oxide
Warranty: 50 Year Residential, 3 Year Light Commercial, Lifetime Structural

Moisture Content: ASTM D4442, 7.5 +/- 1.5%
Cross Hatch Adhesion: ASTM D3359, Minimum 4B
Taber Abrasion: ASTM D4060, 500 to 600 Cycles
3 Cycle Soak Test: ANSI/HPVA-2000-4.6, Must Pass
Coefficient of Friction: ASTM D2394, > 0.5
Chemical Staining: ASTM D3023, Rating of 4 or Below
Gloss Retention: ASTM D2456, Percent Change of +/- 5%
Formaldehyde Emissions: Compliant to CARB, Phase II
Lacey Act: Compliant to Regulations

Quantity per Carton 33.08 Square Feet
# Cartons per Pallet 32
SF per Pallet 1,058.56 Square Feet
# Pallets / Container 34
Quantity / Container 35,991.04 Square Feet


Adhesive: Bostick’s Pro Cure adhesive is recommended for this product. For other approved adhesives, please contact the manufacturer.
Guidelines: For detailed information about acclimation, site and subfloor preparation and installation, please refer to Millwork’s Installation Instructions.